Window Shutters on a Budget

While there is great value in installing custom-made interior wood window shutters, sometimes they are still too expensive for certain applications. Some alternatives – including poly or vinyl – are less expensive but also much less attractive. For a high-quality solution at a lower cost, look for a company that sells individual solid wood panels that can be installed in any configuration.



When shopping for individual shutter panels, there are a few considerations to keep in mind. The most important factor is the material used to make the interior panels. Basswood has the best characteristics because it is a very straight hard wood with little distortion. Basswood also has a fine, uniform texture and indistinct grain, which make it superior for staining or painting. You should also look for a company that can make a large number of panel sizes so you can receive the best final fit for your window.

How To Determine Individual Panel Sizes to Order

It is best to determine how you will mount your panels before ordering. Sometimes it is necessary to use hanging strips to attach them to the outside of the window opening. A reputable company will provide information about different installation methods so you can determine how best to install on a specific window.

Width

Measure the width of the area you want to cover (NOT including any trim strips).

1. Divide this width by the number of panels you want across the window. This will give you the approximate width of each panel. Round this measurement up to the nearest 1/4 inch.

Example: Width = 36-7/16"Divide by 4 and round up to nearest 1/4"Order (4) shutter panels 9-1/4" wide

Height

Up to 1" may be trimmed off the top and the bottom of each individual panel (a total of 2" per panel).

1. For a two tier unit (panels across the top and bottom), combine individual panel heights as required.

Finishing

A high-quality wood panel can be painted or stained to a beautiful finish. Even if they arrive and seem fairly smooth, a light sanding is advised before beginning the finishing process. After sanding and brushing off any dust, primer and paint can be applied. Often a more smooth finish is achieved by spraying the primer and paint, although the use of a high-quality brush can also result in a nice finish. When staining, follow the instructions given by the stain manufacturer. The stain manufacturer may recommend applying a wood conditioner before staining in order to ensure even stain color penetration.

Once you have finished your shutters and have installed them, you will have a high-quality product that will increase the value of your home at a fraction of the cost of custom-made panels.

Article Courtesy of Article City

Author: Sarah Wright

Top of Shutters Page

Decorating Country Home Page